Search for entries by keyword. Click an entry to view details, non-technical descriptions and images pertaining to the entry.

CATEGORY 5 - TELECOMMUNICATIONS AND 'INFORMATION SECURITY'

Part 1 - TELECOMMUNICATIONS

CATEGORY 5 - TELECOMMUNICATIONS AND 'INFORMATION SECURITY'

Part 1 - TELECOMMUNICATIONS

5E Technology

5E001 "Technology" as follows:

a. "Technology" according to the General Technology Note for the "development", "production" or "use" (excluding operation) of equipment, functions or features specified in 5A001 or "software" specified in 5D001.a.;

b. Specific "technology" as follows:

1. "Required" "technology" for the "development" or "production" of telecommunications equipment specially designed to be used on board satellites;

2. "Technology" for the "development" or "use" of "laser" communication techniques with the capability of automatically acquiring and tracking signals and maintaining communications through exoatmosphere or sub-surface (water) media;

3. "Technology" for the "development" of digital cellular radio base station receiving equipment whose reception capabilities that allow multi-band, multi-channel, multi-mode, multi-coding algorithm or multi-protocol operation can be modified by changes in "software";

4. "Technology" for the "development" of "spread spectrum" techniques, including "frequency hopping" techniques;

c. "Technology" according to the General Technology Note for the "development" or "production" of any of the following:

1. Equipment employing digital techniques designed to operate at a "total digital transfer rate" exceeding 560 Gbit/s;

2. Equipment employing a "laser" and having any of the following:

a. A transmission wavelength exceeding 1750 nm;

b. Not used;

c. Employing coherent optical transmission or coherent optical detection techniques;

d. Employing wavelength division multiplexing techniques of optical carriers at less than 100 GHz spacing; or

e. Employing analogue techniques and having a bandwidth exceeding 2,5 GHz;

3. Equipment employing “optical switching” and having a switching time less than 1 ms;

4. Radio equipment having any of the following:

a. Quadrature-Amplitude-Modulation (QAM) techniques above level 1 024;

b. Operating at input or output frequencies exceeding 31,8 GHz; or

c. Operating in the 1,5 MHz to 87,5 MHz band and incorporating adaptive techniques providing more than 15 dB suppression of an interfering signal;

5. Not used;

6. Mobile equipment having all of the following:

a. Operating at an optical wavelength greater than or equal to 200 nm and less than or equal to 400 nm; and

b. Operating as a "local area network";

d. "Technology" according to the General Technology Note for the "development" or "production" of Microwave Monolithic Integrated Circuit (MMIC) power amplifiers specially designed for telecommunications and having any of the following:

1. Rated for operation at frequencies exceeding 2,7 GHz up to and including 6,8 GHz with a "fractional bandwidth" greater than 15%, and having any of the following:

a. A peak saturated power output greater than 75 W (48,75 dBm) at any frequency exceeding 2,7 GHz up to and including 2,9 GHz;

b. A peak saturated power output greater than 55 W (47,4 dBm) at any frequency exceeding 2,9 GHz up to and including 3,2 GHz;

c. A peak saturated power output greater than 40 W (46 dBm) at any frequency exceeding 3,2 GHz up to and including 3,7 GHz; or

d. A peak saturated power output greater than 20 W (43 dBm) at any frequency exceeding 3,7 GHz up to and including 6,8 GHz;

2. Rated for operation at frequencies exceeding 6,8 GHz up to and including 16 GHz with a "fractional bandwidth" greater than 10%, and having any of the following:

a. A peak saturated power output greater than 10W (40 dBm) at any frequency exceeding 6,8 GHz up to and including 8,5 GHz; or

b. A peak saturated power output greater than 5W (37 dBm) at any frequency exceeding 8,5 GHz up to and including 16 GHz;

3. Rated for operation with a peak saturated power output greater than 3 W (34,77 dBm) at any frequency exceeding 16 GHz up to and including 31,8 GHz, and with a "fractional bandwidth" of greater than 10%;

4. Rated for operation with a peak saturated power output greater than 0,1 nW (-70 dBm) at any frequency exceeding 31,8 GHz up to and including 37 GHz; Rated for operation with a peak saturated power output greater than 1 W (30 dBm) at any frequency exceeding 37 GHz up to and including 43,5 GHz, and with a "fractional bandwidth" of greater than 10%;

6. Rated for operation with a peak saturated power output greater than 31,62 mW (15 dBm) at any frequency exceeding 43,5 GHz up to and including 75 GHz, and with a "fractional bandwidth" of greater than 10%;

7. Rated for operation with a peak saturated power output greater than 10 mW (10 dBm) at any frequency exceeding 75 GHz up to and including 90 GHz, and with a "fractional bandwidth" of greater than 5%; or

8. Rated for operation with a peak saturated power output greater than 0,1 nW (- 70 dBm) at any frequency exceeding 90 GHz;

e. "Technology" according to the General Technology Note for the "development" or "production" of electronic devices and circuits, specially designed for telecommunications and containing components manufactured from "superconductive" materials, specially designed for operation at temperatures below the "critical temperature" of at least one of the "superconductive" constituents and having any of the following:

1. Current switching for digital circuits using "superconductive" gates with a product of delay time per gate (in seconds) and power dissipation per gate (in watts) of less than 10-14 J; or

2. Frequency selection at all frequencies using resonant circuits with Q-values exceeding 10 000.

5E101 "Technology" according to the General Technology Note for the "development", "production" or "use" of equipment specified in 5A101.

General Notes

No information to display.

Definition of Terms

No information to display.

Images

No images to display.

Reasons for Control

No information to display.

CN Codes

No information to display.