Search for entries by keyword. Click an entry to view details, non-technical descriptions and images pertaining to the entry.

CATEGORY 1 - SPECIAL MATERIALS AND RELATED EQUIPMENT

1A Systems, Equipment and Components

CATEGORY 1 - SPECIAL MATERIALS AND RELATED EQUIPMENT

1A Systems, Equipment and Components

1A001 Components made from fluorinated compounds, as follows:

a. Seals, gaskets, sealants or fuel bladders, specially designed for "aircraft" or aerospace use, made from more than 50 % by weight of any of the materials specified in 1C009.b. or 1C009.c.;

b. Not used;

c. Not used;

1A002 “Composite” structures or laminates, having any of the following:

a. Consisting of an organic "matrix" and materials specified in 1C010.c., 1C010.d. or 1C010.e.; or

b. Consisting of a metal or carbon "matrix", and any of the following:

1. Carbon "fibrous or filamentary materials" having all of the following:

a. A "specific modulus" exceeding 10,15 × 10E6 m; and

b. A "specific tensile strength" exceeding 17,7 × 104 m; or

2. Materials specified in 1C010.c.

1A003 Manufactures of non-"fusible" aromatic polyimides in film, sheet, tape or ribbon form having any of the following:

a. With a thickness exceeding 0,254 mm; or

b. Coated or laminated with carbon, graphite, metals or magnetic substances.

1A004 Protective and detection equipment and components not specially designed for military use, as follows:

a. Full face masks, filter canisters and decontamination equipment therefor, designed or modified for defence against any of the following, and specially designed components therefor:

1. Biological agents';

2. Radioactive materials "adapted for use in war";

3. Chemical warfare (CW) agents; or

4. "Riot control agents", including:

a. α-Bromobenzeneacetonitrile, (Bromobenzyl cyanide) (CA) (CAS 5798-79-8);

b. [(2-chlorophenyl) methylene] propanedinitrile, (o-Chlorobenzylidenemalononitrile) (CS) (CAS 2698-41-1);

c. 2-Chloro-1-phenylethanone, Phenylacyl chloride (ω-chloroacetophenone) (CN) (CAS 532-27-4);

d. Dibenz-(b,f)-1,4-oxazephine (CR) (CAS 257-07-8);

e. 10-Chloro-5,10-dihydrophenarsazine, (Phenarsazine chloride), (Adamsite), (DM) (CAS 578-94-9);

f. N-Nonanoylmorpholine, (MPA) (CAS 5299-64-9);

b. Protective suits, gloves and shoes, specially designed or modified for defence against any of the following:

1. Biological agents';

2. Radioactive materials "adapted for use in war"; or

3. Chemical warfare (CW) agents;

c. Detection systems, specially designed or modified for detection or identification of any of the following, and specially designed components therefor:

1. Biological agents';

2. Radioactive materials "adapted for use in war"; or

3. Chemical warfare (CW) agents.

d. Electronic equipment designed for automatically detecting or identifying the presence of "explosives" residues and utilising 'trace detection' techniques (e.g., surface acoustic wave, ion mobility spectrometry, differential mobility spectrometry, mass spectrometry).

1A005 Body armour and components therefor, as follows:

a. Soft body armour not manufactured to military standards or specifications, or to their equivalents, and specially designed components therefor;

b. Hard body armour plates providing ballistic protection equal to or less than level IIIA (NIJ 0101.06, July 2008) or national equivalents.

1A006 Equipment, specially designed or modified for the disposal of improvised explosive devices, as follows, and specially designed components and accessories therefor:

a. Remotely operated vehicles;

b. Disruptors'.

1A007 Equipment and devices, specially designed to initiate charges and devices containing “energetic materials”, by electrical means, as follows:

a. Explosive detonator firing sets designed to drive explosive detonators specified in 1A007.b.;

b. Electrically driven explosive detonators as follows:

1. Exploding bridge (EB);

2. Exploding bridge wire (EBW);

3. Slapper;

4. Exploding foil initiators (EFI).

1A008 Charges, devices and components, as follows:

a. Shaped charges' having all of the following:

1. Net Explosive Quantity (NEQ) greater than 90 g; and

2. Outer casing diameter equal to or greater than 75 mm;

b. Linear shaped cutting charges having all of the following, and specially designed components therefor:

1. An explosive load greater than 40 g/m; and

2. A width of 10 mm or more;

c. Detonating cord with explosive core load greater than 64 g/m;

d. Cutters, other than those specified in 1A008.b., and severing tools, having a Net Explosive Quantity (NEQ) greater than 3,5 kg.

1A102 Resaturated pyrolized carbon-carbon components designed for space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.

1A202 Composite structures, other than those specified in 1A002, in the form of tubes and having both of the following characteristics:

a. An inside diameter of between 75 mm and 400 mm; and

b. Made with any of the "fibrous or filamentary materials" specified in 1C010.a. or b. or 1C210.a. or with carbon prepreg materials specified in 1C210.c.

1A225 Platinized catalysts specially designed or prepared for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water.

1A226 Specialized packings which may be used in separating heavy water from ordinary water, having both of the following characteristics:

a. Made of phosphor bronze mesh chemically treated to improve wettability; and

b. Designed to be used in vacuum distillation towers.

1A227 High-density (lead glass or other) radiation shielding windows, having all of the following characteristics, and specially designed frames therefor:

a. A 'cold area' greater than 0,09 m²;

b. A density greater than 3 g/cm³; and

c. A thickness of 100 mm or greater.

General Notes

No information to display.

Definition of Terms

No information to display.

Images

No images to display.

Reasons for Control

No information to display.

CN Codes

No information to display.